E-14
USING THE BATTERY PACK
Using the Battery Pack (Optional) OL-BT7201A
POWER indicator
(Green)
* To load, match the guide indentations on the
battery pack with the projections on the
control unit, and slide the battery pack in.
* To unload, turn off the power and
slide the battery pack back while
pressing the battery unloading
switch.
Guide indentations
Projection
●
Load the battery pack onto the battery pack holder on the control unit in the direction shown.
●
The battery pack will last approximately one and a half hours. (The time varies depending on
the remaining battery power and the operating environment.)
●
When the battery is nearly exhausted, the battery remaining power indicator blinks in the lower
right corner of the screen. The green indicator on the control unit starts blinking at the same
time.
●
After the battery remaining power indicator blinks for about 30 seconds, the message LOW
BATTERY, AUTOMATIC POWER OFF. appears on the screen and the power turns off
automatically.
●
You cannot charge the battery pack using the control unit of this product. Use the optional
battery charger. Read the battery pack instructions for details.
●
When AC power is used with the battery pack loaded, the power is supplied from the AC
adapter. (Power will not be supplied from the battery pack when the AC adapter is connected
to the control unit.)
●
When the battery pack is not to be used for a long period of time, remove it from the control
unit.
●
When power is on and the battery is running out, the image may not appear on either the right
or left screen. This is not a malfunction; charge the battery before using the unit.
CAUTION:
Do not expose to high temperatures (60
°
C/140
°
F).
Do not disassemble.
Do not incinerate.
There is a danger of explosion if the battery is incorrectly replaced.
Replace battery pack with Olympus Co., Ltd. part no. OL-BT7201A only.
Use of another battery may present a risk of fire or explosion.
Dispose of used battery promptly. Keep away from children.
