![Olympus EVOLT E-330 Скачать руководство пользователя страница 126](http://html2.mh-extra.com/html/olympus/evolt-e-330/evolt-e-330_advanced-manual_3944775126.webp)
126
Direct printing (PictBridge)
Pri
nting
8
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
1
Turn the printer on and plug the
printer end of the USB cable into
the printer's USB port.
•
For details on how to turn the printer
on and the position of the USB port,
refer to the printer's manual.
2
Plug the USB cable into the
camera's multi-connector and
turn the camera on.
•
The selection screen for the USB
connection is displayed.
3
Use
p
to select [
If you select [
•
Go to “Easy printing” (P. 127).
If you select [
is displayed and
the camera and printer are connected.
Go to “Flowchart for custom printing” (P. 127).
x
•
If the screen is not displayed after a few minutes, turn off the camera and start
again from Step 2.
Multi-connector
s0003_e_advanced.book Page 126 Wednesday, December 28, 2005 2:33 PM