Olympus E-P2 - PEN 12.3 MP Micro Four Thirds Interchangeable Lens Digital..., Инструкция по эксплуатации

Страница: 92 / 164

92
EN
6
Setup f
u
nct
ions
In
P
,
A
,
S
,
M
or
n
mode, current camera settings (including any changes you have made)
are retained when the power is turned off. To reset the camera to the factory default settings,
set
[RESET] .
Registering [RESET1]/[RESET2]
If settings after a reset are pre-registered to [RESET1] / [RESET2] , the camera can be reset to
the factory default settings, by executing [RESET1] / [RESET2] . In the
n
mode, settings
corresponding to the
n
mode are reset.
For details on the registered functions, refer to “Functions that can be registered with My
Mode and Custom Reset Setting” (
g
P. 138).
1
Select either [RESET1]/[RESET2] to register and press
i
.
• If settings have already been registered, [SET] is displayed next to [RESET1] / [RESET2] .
Selecting [SET] again overwrites the registered setting.
• To cancel the registration, select [RESET] .
2
Select [SET] and press the i button.
Using reset settings
This resets the camera to the factory default settings. You can also reset the camera to the
[RESET1] or [RESET2] setting.
[RESET] Resets to the factory default settings. For the default settings, see
“Menu directory” (
g
P. 139).
[RESET1]/[RESET2] Resets to the registered settings.
1
Select [RESET], [RESET1], or [RESET2] and press
the
i button.
2
Use
fg
to select [YES], then press the i
button.
Resetting the camera settings
Menu
MENU
[
W
] [CUSTOM RESET]
Menu
MENU
[
W
] [CUSTOM RESET]
RESET1
YES
NO
BACK SET
s0026_e_00_0_unified.book Page 92 Tuesday, September 29, 2009 10:30 AM