Olympus E M10 Pancake Kit Silver, Инструкция по эксплуатации

Страница: 107 / 161

107 EN
Connecting the camera to a smartphone
8
8
You can use the wireless LAN function on this camera to connect to a Wi-Fi compatible
smartphone. You can then use the smartphone to share (view and send images) or
operate the camera. To connect, you will need to install the OI.Share (OLYMPUS
IMAGE SHARE) App on the smartphone.
For details visit:
http://olympuspen.com/OIShare/
#
Cautions
• Before using the wireless LAN function, read “Precautions when using the
wireless LAN function” (P. 149).
• If using the wireless LAN function in a country outside the region where the camera
was purchased, there is a risk that the camera will not conform to the wireless
communication regulations of that country. Olympus will not be held responsible for
any failure to meet such regulations.
• As with any wireless communication, there is always a risk of interception by a third
party.
• The wireless LAN function on the camera cannot be used to connect to a home or
public access point.
Setting up your camera for wireless LAN connection
(Wi-Fi settings)
To use the wireless LAN functions on the camera, you need to make setting such as
the password to be used when connecting. [Private], which uses the same settings
every time you connect, and [One-Time], which is limited to a one-time connection are
available.
Setting a password selection method
1
Select [Wi-Fi Settings] in the
d
Setup Menu and press
Q
.
2
Select [Wi-Fi Connect Settings] and press I .
3
Select the wireless LAN connection method and press
Q
.
• [Private]: Connect using a preset password.
• [One-Time]: Connect using a different password each time.
• [Select]: Select which method to use each time.
• [Off]: The Wi-Fi function is turned off.
Changing private connection password
Change the password used for [Private].
1
Select [Wi-Fi Settings] in the
d
Setup Menu and press
Q
.
2
Select [Private Password] and press I .
3
Follow the operation guide and press the
R
button.
• A new password will be set.
Connecting the camera to a
smartphone