Olympus E-M1, Инструкция по эксплуатации

Страница: 50 / 165

50 EN
Basic operations
5
Using a fl ash (fl ash photography)
The fl ash can be set manually as required. The fl ash can be used for fl ash
photography in a variety of shooting conditions.
1 Attach the fl ash to the camera and raise
the light-emitting unit.
•
g
“Attaching the fl ash unit” (P. 15)
2 Set the lever to position 2 and press the
AF
m
button.
AF
m
button
Lever
P
Flash Auto
AUTO AUTO
00
0.0
When shooting using live view
3 Select a setting using the rear dial and press the
Q
button.
• The options available and the order in which they are displayed vary depending on
the shooting mode.
g
“Flash modes that can be set by shooting mode” (P. 51)
AUTO Auto fl ash
The fl ash fi res automatically in low light or
backlight conditions.
#
Fill-in fl ash The fl ash fi res regardless of the light conditions.
$
Flash off The fl ash does not fi re.
!
/
#
!
Red-eye reduction fl ash
This function allows you to reduce the red-eye
phenomenon. In
S
and
M
modes, the fl ash
always fi res.
#
SLOW
Slow synchronization
(1st curtain) Slow shutter speeds are used to brighten dimly-lit
backgrounds.
!
SLOW
Slow synchronization
(1st curtain)/Red-eye
reduction fl ash
Combines slow synchronization with red-eye
reduction.
#
SLOW2/
2nd
Curtain
Slow synchronization
(2nd curtain)
The fl ash fi res just before the
shutter closes to create trails
of light behind moving light
sources.
#
FULL ,
#
1/4 etc.
Manual
For users who prefer manual operation. If you
press the
INFO
button, you can use the dial to
adjust the fl ash level.
4 Press the shutter button all the way.