Olympus DS-10, Инструкция по эксплуатации

Страница: 18 / 188

18
Index Marks
Setting an Index Mark
1
Press the
INDEX
button during
recording or playback to set an
index mark.
An index number appears on the display.
Locating an Index Mark
1
Hold the
FF/+
or
REW/–
button
while playing a file.
The recorder stops for 1 second when it
reaches the index mark.
Clearing an Index Mark
1
Locate the index mark you want to
clear.
2
Press the
ERASE
button while the index
number appears for approximately 2
seconds on the display.
The index mark is erased.
Notes
• Up to 16 index marks can be set in a file. Attempting to
set more index marks will cause “INDEX FULL” to appear
on the display.
• Index marks cannot be set or cleared in a locked file (
☞
P.16).
• As for WMA format files, only ones recorded with this
recorder can have index marks.
Index marks can be incorporated into a file
during recording or playback to make it easy
to locate interesting information.
LCD Contrast
Adjustment
(CONTRAST)
If the display is difficult to see because of
environmental conditions and temperature,
you can adjust the contrast using this function
to easily see the LCD display (display
contrast).
Display contrast can be adjusted in 20 levels.
1
Press the
MENU
button.
The menu opens (
☞
P.25).
2
Press the
FF/+
or
REW/–
button
until “CONTRAST” flashes on the
display.
3
Press the
PLAY/SET
button.
The LCD display contrast setup process
begins.
4
Press the
FF/+
or
REW/–
button
to set the contrast level.
You can adjust the LCD display contrast
level from 1 to 20 (Initial setting: 10).
5
Press the
PLAY/SET
button to
complete the setup screen.
6
Press the
STOP
button to close the
menu.
Index Marks / LCD Contrast
Adjustment (CONTRAST)