background image

DP80

7

1

 

Intended use

This device is intended to be used for the capture of digital images, but not for clinical diagnostic purposes.

2

 

Conformity of the System

Restrictions in Use

1. The applicable camera adapters are the U-TV0.63XB, MVX-TV1XB, and the combination of U-TV1X-2 and U-BMAD.
2. When the DP80 is connected to the rear port of the U-DPT (double port tube) or U-MPH (multi port head), the periph-

eral part of the recorded image may be deteriorated due to the optical performance of the U-DPT or U-MPH.

3. When the U-TV0.63XB is used, using two or more intermediate attachments* may obscure the peripheral part of the 

field of view or may make flare noticeable.

* Example of two intermediate attachments with BX microscope: 

Reflected light illum intermediate attachment equivalent to the U-CA.

4. Under fluorescent ring illumination or other AC-driven illumination such as a phase control light intensity adjusting 

illumination system, the following phenomena may be observed by illumination light flickering because of high light 
intensity and shortened exposure time :

Содержание DP80

























































Отзывы: