103158-01EN [U8998465], Rev. A, April 2012
12 Important Information — Please Read Before Use
If a non-approved power supply cord not dedicated to Olympus products is
used, Olympus will not be able to ensure the electrical safety of the equipment.
WEEE Directive
China RoHS
China RoHS
is the term used by industry generally to describe legislation
implemented by the Ministry of Information Industry (MII) in the People’s
Republic of China for the control of pollution by electronic information
products (EIP).
EMC Directive Compliance
FCC (USA) Compliance
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, might cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case you will
be required to correct the interference at your own expense.
EC Directive Compliance
This device complies with the requirements of Directive 2006/95/EC
concerning electrical equipment designed for use within certain voltage limits.
This device complies with the requirements of Directive 2004/108/EC
concerning electromagnetic compatibility when used in combination with
devices bearing the CE marking either on the products or in its instructions.
The above-mentioned Directives are in compliance with the designated
configuration for the EU region. Regions outside the EU that do not use the
same configuration are not required to comply with the above-mentioned
Directives.
Warranty Information
Olympus guarantees your Olympus product to be free from defects in
materials and workmanship for a period and in accordance with the conditions
specified in the
Olympus NDT Terms and Conditions
http://www.olympus-ims.com/en/terms/.
The Olympus warranty only covers equipment that has been used in a proper
manner, as described in this instruction manual, and that has not been
subjected to excessive abuse, attempted unauthorized repair, or modification.
Inspect materials thoroughly on receipt for evidence of external or internal
damage that might have occurred during shipment. Immediately notify the
carrier making the delivery of any damage, because the carrier is normally
liable for damage during shipment. Retain packing materials, waybills, and
other shipping documentation needed in order to establish a damage claim.
After notifying the carrier, contact Olympus for assistance with the damage
claim and equipment replacement, if necessary.
This instruction manual attempts to teach the proper operation of your
Olympus product. The information contained herein is intended solely as a
teaching aid and shall not be used in any particular application without
independent testing and/or verification by the operator or the supervisor. Such
independent verification of procedures becomes more important as the
criticality of the application increases. For this reason, Olympus makes no
warranty, expressed or implied, that the techniques, examples, or procedures
described herein are consistent with industry standards, nor that they meet the
requirements of any particular application.
Olympus reserves the right to modify all products without incurring the
responsibility for modifying previously manufactured products.
Technical Support
Olympus is firmly committed to providing the highest level of customer
service and product support. If you experience any difficulties when using our
product, or if it fails to operate as described in the documentation, first consult
the user’s manual, and then, if you are still in need of assistance, contact our
After-Sales Service. To locate the nearest service center, please contact the Sales
Representative the product was purchased from.
Copyright Notice
Olympus NDT, Inc., 48 Woerd Avenue, Waltham, MA 02453, USA
Printed in the United States of America
●
© 2012 by Olympus NDT, Inc. All
rights reserved. All brands are trademarks or registered trademarks of their
respective owners and third party entities.
In accordance with European Directive
2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE), this
symbol indicates that the product must
not be disposed of as unsorted municipal
waste, but should be collected separately.
Refer to your local Olympus distributor
for return and/or collection systems
available in your country.
The China RoHS mark indicates the
product’s Environmental Friendly
Usage Period (EFUP). The EFUP is
defined as the number of years for
which listed controlled substances
will not leak or chemically
deteriorate while in the product. The
EFUP for the DELTA has been
determined to be 15 years.
Note: The Environment-Friendly
Usage Period (EFUP) is not meant to
be interpreted as the period assuring
functionality and product
performance.
