29
Setting the date and time
1
Ge
tt
ing st
ar
te
d
6
Press
to select one of the
following date formats: Y-M-D
(Year/Month/Day), M-D-Y (Month/
Day/Year), D-M-Y (Day/Month/Year).
Then press .
• Move to the year setting.
• The following steps show the procedure
used when the date and time settings are
set to Y-M-D.
7
Press
to set the year, and
press to move to the month
setting.
• To move back to the previous setting,
press .
• The first two digits of the year are fixed.
8
Repeat this procedure until the
date and time are completely set.
• The camera only displays the time in 24-hour time sysytem ("2.pm"
would be "14:00").
9
Press .
• For a more accurate setting, press
when the time signal hits 00 seconds.
The clock starts when you press the
button.
10
Close the lens barrier to turn the
camera off.
• The current settings are retained even when the power is turned off,
unless they are readjusted.
• The date and time settings will be canceled if the camera is left without
batteries for approximately 30 minutes. The settings will be canceled
more quickly if the batteries were only loaded in the camera for a short
time before being removed. Before taking important pictures, check that
the date and time settings are correct.
TIPS
• The date and time can also be set from the playback mode.
OK button
Note
