Inserting SmartMedia
Note:
• Use 3V (3.3V) cards only. 5V cards cannot
be used.
• Olympus brand cards are recommended
(already formatted). Non-Olympus brand
cards must be formatted by the camera.
• When using a special function SmartMedia
card (optional), insert it in the same way.
Caution:
• NEVER open the card cover, eject the card, remove the batteries, or pull the
plug while the camera is in operation. It may destroy the data in the card.
• The card is a precision instrument. Handle it carefully and do not subject it
to physical shocks.
• Do not touch the contact area of the card.
Power on/off
Remove the lens cap, then set the Mode dial to P, A/S/M,
or
. If there
are no pictures stored in the card when the Mode dial is set to
, NO
PICTURE will appear on the LCD monitor.
Checking the card
When the power is turned on in the Record mode, the camera checks the
SmartMedia card.
When there is no SmartMedia card in
the camera / the card is protected:
The Card error indicator on the control
panel and the Green lamp blink.
When the card needs to be formatted:
The Card error indicator on the control
panel lights, and the Card format
confirmation screen appears. Select
to enter the Card format mode.
6
Card error
Control panel
Viewfinder
Green lamp
CARD
SETUP
NO [OFF]
LCD monitor
Insert
SmartMedia
.
