background image

         Avoid opening the card cover, removing the SmartMedia card, or removing the  
         batteries while the camera is ON. Doing so could damage all pictures stored on the 
         SmartMedia card.

Olympus America, Inc. 
Two Corporate Center Drive 
Melville, NY 11747-3157

Need more help?

visit http://support.olympusamerica.com 

for online automated help

START

HERE

It is strongly recommended 
that you follow these step-
by-step numbered 
instructions to set up and 
quickly begin using your 
new C-4000 Zoom digital 
camera. 

QuickStart Guide
C-4000 ZOOM 

For more detailed instructions on advanced features, please refer
to the printed Basic Manual included in your package, or the 
Reference Manual on the CD-ROM.

UNPACKING THE BOX CONTENTS

Gather your C-4000 Zoom and all the parts as shown in the illustrations. You'll need these to complete the steps for the 
camera set-up procedures that follow.

C-4000 Zoom 
with lens cap

Lens cap 

retainer string

Strap

Two CR-V3 

lithium batteries

CAMEDIA 

Master 4.0 CD-ROM

16MB SmartMedia card 

with static-free case 

and labels

USB cable

(beige color)

TIP: To maximize battery life, the C-4000 Zoom features a power saving mode in which the camera enters a sleep 
mode after approximately three (3) minutes of non-use.  Press the shutter button or zoom lever to wake up the camera.

Before you begin using your Olympus C-4000 Zoom Digital Camera…

The camera Power/Mode dial is used to select the various operation modes.

a.

b.

Insert the SmartMedia

 Card

The SmartMedia card is where the camera stores your pictures. The pictures 
you take remain on the SmartMedia card even when the camera is turned off 
and/or the batteries are removed.

First, make sure the camera is OFF. Open the card cover door. Note the diagram on the inside of the 
door. Match the orientation of the SmartMedia card to the diagram, and slide the card into the spring-
loaded slot as far as it will go. Close the cover until it locks into place; you will feel it snap closed.

Attach the carrying strap and lens cap retainer string 

(OPTIONAL)

We recommend that you attach the strap and lens cap retainer string at this time to make the 
camera easier to handle and prevent loss of the lens cap. Attach the strap as illustrated.

To remove a SmartMedia card, push it into the camera, and then release it. The card partially ejects 
and can now be removed.

c.

A

F

ZO

OM 6.5-19.5MM

1:2

.8

O

LY

MPUS LEN

S

The following items are also included in the C-4000 Zoom package: Video cable, SmartMedia card instructions, Basic Manual, 
warranty card, registration card, safety precautions booklet, and SmartMedia write-protect adhesive seals.

a.

Set the Date and Time 

(OPTIONAL)

Although this is not required, it is recommended that you set the date and time. This affects the way 
image files are named, and each picture will be recorded with this information.
   • Set the mode dial to "P" and press    . The monitor turns on and the top menu appears.
   • Press    on the arrow pad to select MODE MENU.
   • To access the Date/Time menu, press      three (3) times to scroll to the SET tab. Now press    . 
   • Press       five (5) times to select     , and then press    .
   • Use the            keys to select the desired date format (usually M, D, Y).
   • Press    to proceed to the next field. Adjust the date and time in the appropriate fields using the    
      keys. Repeat the process until all date/time fields have been set.
   
• Press     twice to set the date and time and exit the menu.

c.

TURNING ON THE CAMERA

Turn the camera ON

    • Squeeze the tabs on the sides of the lens cap to remove it.
    • Turn the Power/Mode dial counter clock-wise to the "P" position.The monitor will activate briefly,
       and then turn off.

b.

Note: Time is entered using the 24-hour format.

Note: Depending on 
         the camera settings, 
         not all indicators 
         will be displayed

Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

A

F

ZO

OM

6.5-19.5M

M

1:

2.

8

O

LY

MPUS LEN

S

DC-IN jack

VIDEO-OUT jack

Connector cover

Lens cap

and retainer

string

USB connector

5-pin external

flash socket

Self-timer lamp

Strap eyelet

Flash

Shutter button

Zoom lever

Mode dial

Lens

Diopter adjustment dial

Battery compartment lock

Battery compartment cover

Tripod socket

AF target mark

Macro/Spot button

Print button

Arrow pad

Flash mode button

Erase button

Monitor

Viewfinder

OK/Menu button

Manual focus button

Monitor button

Card access lamp

Custom button

Protect button

Rotation button

Camera Settings in Shooting Mode as shown in Monitor

Camera Settings in Playback Mode as shown in Monitor

Battery check

Exposure compensation

Protect

White balance
ISO
Date and time
File number

Record mode

Print reserve

Number of prints

Number of pixels

FILE: 100-0016

02.06.10  12:30

ISO400

SIZE: 1984X1488

X10

Battery check

Exposure compensation
Exposure differential

AF Target mark

Shooting mode

Flash stand-by/Camera movement warning
Flash charge

Green lamp

Flash mode

Memory gauge

Spot metering
Macro mode
Super macro mode

Number of storable
still pictures
Seconds remaining

F2.8 1/800

2288x1712

0.0

Drive mode

Self-timer

AE lock/AE memory

Shutter speed

Aperture

value

White balance

ISO

Record mode
Number of pixels

AEL

TIP: For best results, Olympus strongly recommends using four AA nickel metal 
hydride (NiMH) rechargeable batteries. An optional Olympus AC adapter also 
is available, and is recommended when downloading images to ensure a consistent 
power supply. 

See the C-4000 Zoom Basic Manual for more information on battery use.

PREPARE THE CAMERA FOR USE

Battery compartment lock

Load the batteries

The CR-V3 lithium batteries included with your C-4000 Zoom 
are much more powerful than standard AA alkaline batteries. 
Please note that they are not rechargeable.

Load the two CR-V3 lithium batteries. Note they can only be
inserted with the indentations facing each other. The contact terminals
must be inserted first, as shown at right. Never force battery insertion.
When loading CR-V3 batteries ignore the illustration on the camera body.

If you are loading four AA type batteries into the compartment, load them as 
indicated in the illustration on the camera body. Close the cover and lock the 
battery compartment door.

VT452702

Printed in Japan

Отзывы: