Loading the Battery and Card
(SmartMedia)
Checking the Package Contents
Shooting Pictures
1.
Open the lens barrier.
Slide the lens barrier until it clicks to turn on the camera.
2.
Hold the camera, and look through the
viewfinder.
Lens barrier
3.
Press the shutter button halfway (half-press) to make sure the green lamp on
the right of the viewfinder lights.
When lit:
The subject is in focus. You can shoot.
When blinking:
The subject is out of focus. Half-press the shutter button
again.
Green lamp
Viewfinder
4.
Press the shutter button all the way (full-press) to take the picture.
The shutter is released and the picture is
taken.
Once the picture has been taken, it is
displayed on the monitor for a
short time.
Monitor
1.
Make sure the lens barrier is closed.
Lens barrier
Card cover
If the lens barrier is open,
slide it to close.
Battery compartment cover
○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2.
Slide the battery compartment
cover in the
direction of the
arrow
q
,
and lift the
cover in the
direction of
the arrow
w
.
CR-
V3x
1orL
R6x
2
3.
Insert the battery in the direction
shown in the
figure.
CR-
V3x
1orL
R6x
2
4.
Close the battery compartment
cover in the direction
of the arrow
q
,
and press the
cover in the
direction of
the arrow
w
unti it clicks.
CR-
V3x
1orL
R6x
2
5.
Open the card cover.
6.
Insert the card as far as it will go in
the direction
shown
in the figure.
Be sure to hold the card so that the cut
corner is positioned correctly. There is
an arrow inside the card cover,
indicating the insertion direction.
7.
Close the card cover until it clicks.
Note:
To remove the
card, hold the
card with your
fingertips, and
pull it out in the
direction of the
arrow
.
Attaching the Provided Strap
1.
Attach the strap as shown.
Strap eyelet
First make sure that all the provided accessories listed below are
included in the package. If anything is missing or damaged, contact
your local Olympus representative immediately.
Camera
CD-ROM
CR-V3 lithium battery pack
USB cable
Video cable
Strap
Basic Manual/Warranty/
Quick Start Guide (this publication)
Static-free case for
SmartMedia
SmartMedia (8 MB)
Write-protect seals for
SmartMedia (4 pieces)
Labels for SmartMedia (2 pieces)
SmartMedia Instructions
01/Quick start guide.En
01.3.15, 6:54 PM
2
