Olympus BXFM Series Скачать руководство пользователя

Страница: 5 / 36

BXFM

Illuminator
Mounting Holder

BXFM-ILHS

BXFM-ILH

Standard
Combination
Weight (Module
Names)

7.5 kg

BX-RLA2, U-TR30-2,
U-LH100-3, revolving
nosepiece, objec-
tives, eyepiece

Additional Load
Limit

2.8 kg

4.0 kg

When the BXFM-
ILHSPU counter
spring is used

5.2 kg

U-KMAS, U-TR30-2,
U-LH100-3, revolving
nosepiece, objec-
tives, eyepiece

· With the combination using the BXFM-ILH illuminator mounting holder,

do not use the U-ST stand because this makes the system unstable.

· The system can be stabilized by using the SZ-STL large stand, but the

image may fluctuate or blur irregularly when a 50X or higher-power ob-
jective is used.

· It is recommended to fabricate an exclusive clamping tool which uses

the support mounting hole (P. 20) or module mounting screw hole of the
BXFM-F focusing unit.

Symbol

Explanation

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equip-
ment in the safest possible manner.

Indicates that the surface becomes hot, and should not be touched with bare hands.

Before use, carefully read the instruction manual. Improper use could result in personal injury to
the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Warning engraving/stickers are placed at parts where special precaution is required when handling and using the
microscope. Always heed the warnings.

Warning engraving
position

Lamp housing
(Warning against high temperature)

Safety Symbols

Warnings

9. When using a photographic unit or TV camera, be sure to observe the

total weight limit of the modules added to the standard combination as
shown below.

Содержание BXFM Series





































Результаты поиска

Содержание BXFM Series

Отзывы:

Похожие инструкции для BXFM Series

Бренды по названию

Популярные бренды

Olympus BXFM Series, Инструкция по эксплуатации

Результаты поиска

Содержание BXFM Series

Отзывы:

Похожие инструкции для BXFM Series

Бренды по названию

Популярные бренды