Olympus BH-2 BHS, Полная разборка, очистка и сборка

Страница: 13 / 23

Complete Teardown, Cleaning, and Reassembly of the Olympus BH ‐ 2 Sliding Focus Block Revision 2 Page 13 of 23
Figure 30 – Guide rails installed into the arm casting
Reinstall the Guide Rails into the Focus Block
Per the procedure described in Appendix 1 of this
document, reinstall two of the short guide rails into the
side groove in the focus block (see Figure 31 ) and
remove any exposed grease from the two guide rails
(see Figure 32 and Figure 33 ).
Figure 31 – Reinstall short guide rails into the focus block
Figure 32 – Scrub grease from guide rails and focus block
Figure 33 – Guide rails installed into the focus block
Reinstall the Guide Rails into the Guide Block
Per the procedure described in Appendix 1 of this
document, reinstall the two remaining short guide rails
into the side groove in the guide block (see Figure 34 )
and remove any exposed grease from the two guide
rails (see Figure 35 and Figure 36 ).
Figure 34 – Reinstall short guide rails into the guide block
Figure 35 – Scrub grease from guide rails and guide block