Olympus 72DL PLUS Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 60

Olympus 72DL PLUS Скачать руководство пользователя страница 20

10-014357-01EN, Rev. 2, January 2022

Important Information — Please Read Before Use

14

FCC (USA) Compliance

This product has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the product is operated in a
commercial environment. This product generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instruction
manual, might cause harmful interference to radio communications. Operation of this
product in a residential area is likely to cause harmful interference, in which case you
will be required to correct the interference at your own expense.

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the product.

FCC Supplier’s Declaration of Conformity

Hereby declares that the product,

Product name: 72DL PLUS precision thickness gauge
Model: 72DL PLUS

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107 and Section 15.109.

Supplementary information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference

that may cause undesired operation.

Responsible party name:

Olympus Scientific Solutions Americas Corp.

NOTE

WARNING

Downloaded from

«
...
18
19
20
21
22
...
»

Содержание 72DL PLUS





























































Отзывы:

Нет отзывов