Olympus ?-7050, Инструкция по эксплуатации

Страница: 31 / 84

31
EN
To combine only two pictures, press the
A
button
before taking the third frame.
5
Repeat steps
3
and
4
to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the
m
button.
Taking pictures with [PC] Taking pictures with [PC]
1
Use
FGHI
to select the direction that the frames
are combined.
2
Press the shutter button to take the fi rst frame, and
then compose the second shot.
PC PC
1 2 1 2
MENU EXIT
PC PC
OK SET
Before fi rst shot
After fi rst shot
After the fi rst shot, the area shown in white
reappears on the side of the display opposite the
pan direction. Frame subsequent photographs so
that they overlap with the image in the monitor.
●
●
3
Repeat Step
2
until the number of desired frames is
taken, and then press the
A
button or
m
button
when fi nished.
Panorama shooting is possible for up to 10 frames.
Refer to the PC software help guide for details on
how to make panorama images.
Smoothing out skin tone and texture
(
Q
mode)
The camera identifi es a person’s face and gives the skin a
smooth, translucent look for taking the picture.
1
Set the shooting mode to
Q
.
14
M
44
0.0 0.0
AUTO
WB
AUTO
WB
BEAUTY BEAUTY
P P
MENU MENU
2
Point the camera toward the subject. Check
the frame appearing around the face detected
by the camera, and then press the shutter
button to take the picture.
The unedited image and edited image are both
saved.
If the image cannot be retouched, only the unedited
image is saved.
The frame may not appear or may take some time to
appear for some subjects. In addition, this function
may have no visible effect on some subjects.
The [IMAGE SIZE] of the retouched image is limited
to [ n ] or lower.
●
●