Olympia Protect 9 Series, Руководство по эксплуатации

Страница: 26 / 40

Configuration
G
26
The button on the remote control can be configured as
an Emergency Call or Panic button via the base unit.
1. Enter your PIN. Confirm it by pressing .
2. Press to open the menu.
3. Select the Remote Key menu option.
Confirm it by pressing .
4. Use the and buttons to select the
Remote: SOS or Remote: PANIC function.
Confirm it by pressing .
Water Leak (Flood) and Smoke Detectors
You can set-up the base unit so that flood and smoke de­
tectors trigger an alarm when the base unit is disarmed.
1. Enter your PIN. Confirm it by pressing .
2. Press to open the menu.
3. Select the Flood & Smoke menu option.
Confirm it by pressing .
4. Use the and buttons to select the
Standard or Activate setting.
Confirm it by pressing .
The table below indicates how the flood and smoke detec­
tors are triggered according to the various settings.
Standard Activate
Phone
call Alarm
signal Phone
call Alarm
signal
Disarmed
mode
No No Yes Yes
At Home
mode
No Yes No Yes
Silent
mode
Yes No Yes Yes
Alarm
mode
Yes Yes Yes Yes
Registering Sensors
You can register up to 32 sensors on the alarm system
base unit.
If you purchase optionally available sensors, such as addi­
tional remote controls, smoke detectors etc., they must be
registered manually.
1. Enter your PIN. Confirm it by pressing .
2. Press to open the menu. Use the and
buttons to select the Register menu option.
Confirm it by pressing .
3. Search… appears in the display
4. Activate the sensor to be registered.