Olympia OL3021, Руководство пользователя

Страница: 32 / 35

OL3021/OL3022 User Manual
32
No CID
There is no CID information.
Note : For records that have a total number of characters and digits exceeding the storage capacity, part of the data will be
truncated.
Pressing UP displays the previous record in the Caller ID list. At the beginning of the Caller ID List, pressing UP will go to
the last record.
Pressing
DOWN displays the next record in the Caller ID list. At the end of the Caller ID List, pressing DOWN will go to
the top of the list.
Pressing
RIGHT once will delete the current displayed record.
Pressing and holding RIGHT for 2 seconds during Caller ID browsing will display:
DELETE ALL?
Pressing RIGHT again will delete all CID records.
If the RIGHT key is not pressed for 10 seconds, the InfoGlobe will return to the Caller ID review mode
12 Setting Timer On/Off
The unit can be programmed to turn on and off at a set time; e.g. turned off at 10:30pm and turned on at 6:00am.
1. Press
SELECT to enter the menu. Press UP or DOWN and scroll to SET ON/OFF TIME .
2. Press SELECT again. The current setting will be shown, e.g.
ON:HH:MMTT OFF:HH:MMTT
3. The hour setting HH for the ON time will be blinking. Use UP or DOWN to select the hour. If you are in 12-hour
mode, make sure you have the correct hour programmed (am or pm)!!!!! If you are in 24-hour mode, am/pm is not an
issue.
4. Use the RIGHT key to move to the minute location MM .
5. Use UP or DOWN to set the desired minute.
Use the RIGHT key to move to the locations for setting the ‘ Timer OFF ’ time in the same manner as above.
6. Confirm the setting by pressing SELECT .
Note : Caller ID information will not be received when the InfoGlobe is turned off.
13 Troubleshooting the InfoGlobe
1. There is no rotation and display after plugging into an electrical outlet.
Ensure that the AC adapter is plugged in properly and batteries are installed properly.
2. There is no Caller ID information being received.
Caller ID is a subscription service from your local telephone company. Ensure that telephone cord is plugged in
correctly.
3. There are sounds of vibration coming from base.
Vibrations coming from the Info Globe are normal. However, check that the device is standing firmly on a level surface
and that there are no other objects close to the unit that may be producing the sound.
4. Floating display looks faint.
Check that AC adapter has been plugged in properly. Place unit against a dark background to obtain maximum