Olympia NC 451, Руководство по эксплуатации

Страница: 16 / 68

16
Giu
Functions
Æ
Select the required function.
Counting
This function counts the number of bank notes and,
depending on the sensor setting, their validity.
During the counting process, the quantity of bank
notes appears in the right-hand display [18].
If the bank notes counted are left in the output
tray [5], counting resumes from the last number. If the
bank notes counted are removed from the output
tray [5] and a new batch of bank notes is placed in the
infeed tray, counting begins from
X0
.
Æ
Press the COUNT button [10].
Ê
The bank notes are counted without any verifica­
tion tests (UV, MG) and discharged in the output
tray [5].
Adding
When this function is activated, counting is continued
even if the bank notes counted are removed from the
output tray [5] and a new bundle of bank notes laid in
the infeed tray [4].
This function is particularly useful in the case of large
stacks of bank notes and for heavily used and
creased bank notes. Smaller stacks of bank notes
can then be counted in succession. The display con­
tinues with the count of the bank notes.
Æ
Press the ADD button [16].
Ê
The Add function is activated/deactivated. ADD
[21] appears in the display.
Batch
This function causes counting to stop when a preset
quantity of bank notes has been counted. If the batch
of bank notes counted is removed from output
tray [5], the display [18] skips back to
X0
and the next
batch of bank notes is counted.
Æ
Press the BAT +1 button [15] or BAT -10 but­
ton [14].
Ê
BAT [20] appears in the display. The preset num­
ber
100
appears in the left-hand display [17].
Æ
Use the BAT +1 button [15] or BAT -10 button [14]
to set the number of notes you require.
The number can be increased by 1 using the
BAT +1 button [15] and reduced by 10 using the
BAT -10 button [14].
Ê
The number entered appears in the left-hand dis­
play [17]. The bank note counter is ready for the
batch function.
Press the RESET button [13] to deactivate the
function.