Users Guide for NC-350A Currency Counter
4
INITIAL OPERATION STEPS
CAUTION: Before you turn on the machine, please ensure you remove ALL Notes from the
Hopper and Stacker areas.
Turn ON the Power Switch on the rear of the machine. The machine will enter a 'Self-Test' mode
whereby the display will show:
The machine Motor systems will run for approximately 1 second and then, if correct, the Motors will
stop and the display will change to show:
When the machine leaves the factory, the Default Functions are set as follows:
UV Counterfeit Detection (UVD) Uv - - 2
(Only for the model with 'UV')
MaGnetic Counterfeit Detection Off
(Only for the model with 'MG')
Counting Speed As Last User Selection
Double Detection dd - - 2
Length Detection Ld - - 5
(Only for the Model with “3D”)
Width Detection Hd - -5
(Only for the Model with “3D”)
Counting Mode As Last User Selection
Auto/Manual Start Auto Start
(Switch to AutoStart when turn on the power again)
