Thank you for purchasing this quality product. Olympia products are rigorously tested to provide long service
under normal conditions. Prior to installation, familiarize yourself with this parts diagram. Make sure that you have
all of the illustrated parts for your Olympia product before installation.
ITEM #
DESCRIPTION
A1
OP-120001
Metal Lever Handle
A2
OP-120003
Metal Loop Handle
B
OP-420008
Cap
C
OP-420009
Retainer Nut
D
OP-320001
Ceramic Disc Cartridge
E
OP-420011
Spray head support
F
OP-420013
Deck Plate & Base Gasket
G
OP-520003
Mounting Bolts & Nuts
H
OP-520004
Locknut
I
OP-590001
Supply Nut
J
OP-420016
Pullout Spray head
K
OP-420014
Weight
L
OP-420015
Spray Hose
INSTALLATION INSTRUCTIONS
Tools you will need:
Plumbers Putty
•
Teflon Tape
•
Screwdriver
•
Flexible Supply Lines
•
Pipe Wrench
•
Adjustable Wrench
•
Basin Wrench
•
Soft Cloth
•
3 HOLE FAUCET INSTALLATION:
Carefully shut off both hot and cold water supplies from under the sink. Plug the sink drain with
1.
a soft cloth to prevent intrusion of debris or the loss of any faucet parts. If this installation is for a
replacement, carefully remove the existing faucet and clean the entire surface of the sink mounting
holes.
Position the faucet on the top of Deck Plate(F), and tighten the locknut (H) to secure deck plate to
2.
the faucet. Thread mounting bolts to the Deck Plate (F). Place adequate amount of plumbers putty
along the base gasket. Put base gasket under deck plate. Place Deck Plate with Base Gasket (F) on
the mounting surface. Lead supply lines through the center hole.
Attach mounting nuts (G) onto the bolts and tighten until the faucet is securely in place. Do not
3.
overtighten.
Connect spray head (J) to the spray hose (L). Insert the spray hose assembly (L) through the faucet
4.
opening and let all the spray hose run into the faucet opening.
From below, attach the weight (K) onto the spray hose (L) and connect the spray hose (L) to the
5.
center outlet line.
Connect stainless steel supply lines to hot (LEFT INLET) and cold (RIGHT INLET) water supplies.
6.
Use with Teflon tape for threaded connections.
Turn on the hot and cold water. Check all around for any leaks.
7.
1 HOLE FAUCET INSTALLATION:
Carefully shut off both hot and cold water supplies from under the sink. Plug the sink drain with
1.
a soft cloth to prevent intrusion of debris or the loss of any faucet parts. If this installation is for a
replacement, carefully remove the existing faucet and clean the entire surface of the sink mounting
holes.
Thread the 1 hole mounting assembly (M) to the faucet from the bottom.
2.
Position the faucet, and from below, tighten the locknut with the help of mounting tool (N) to secure
3.
faucet to the mounting surface, Do not overtighten.
Connect spray head (J) to the spray hose (L). Insert the spray hose assembly (L) through the faucet
4.
opening and let all the spray hose (L) run into the faucet opening.
From below, attach the weight (K) onto the spray hose (L) and connect the spray hose (L) to the
5.
center outlet line.
Connect stainless steel supply lines to hot (LEFT INLET) and cold (RIGHT INLET) water supplies.
6.
Use with Teflon tape for threaded connections.
Turn on the hot and cold water. Check all around for any leaks.
7.
Olympia Faucets, Inc. © 2011
ITEM #
DESCRIPTION
M
OP-520006
1 Hole Mounting Assembly
N
OP-520007
Mounting Tool
1
OP-490005
Button
2
OP-490029
Allen Screw
3
OP-420010
O-Ring
4
OP-420017
Spray head Button
For more care information or trouble shooting inquiries
about your Olympia product, please call:
OLYMPIA FAUCETS, INC.
(888) 772-7701
Central Standard Time: 8:00am ~ 7:00pm
www.olympiafaucets.com