Olympia G 3115, Руководство по эксплуатации

Страница: 8 / 10

8
R
7. Use the handle (2) to move the guillotine
arm (1) down as far as possible. Lock the
guillotine arm by turning the lock (9) anti­
clockwise.
Paper Guide
7
6
1. Release the lock (7) for the paper
guide (6).
2. Slide the paper guide (6) carefully on the
rail.
Note : Do not slide the paper guide (6) if the
lock (7) has not been released.
3. Position the paper guide (6) with the aid of
the measuring units and systems (5).
Note : The paper guide (6) can be adjusted
continually in the rail.
4. Lock the paper guide (6). The paper guide
serves as a stopper for the material to be
cut.
Adjusting the Guillotine
Arm
10
After a period of time in use, the guillotine
arm (1) becomes too loose and no longer re­
mains in position of its own accord. The guillo­
tine arm (1) must then be readjusted.
1. Tighten the screw (10) slowly, using an
appropriate tool.
Note : Check whether the guillotine arm re­
mains in position, taking the safety information
into account. If the guillotine arm is too difficult
to move, loosen the screw (10) slowly, using
an appropriate tool.
Technical Data
Cutting length (mm)
G 3640 360
G 4640 460
G 3120 310
G 4420 448
G 4415 448
G 3115 310
Cutting capacity Sheets (80 g / m²)
G 3640 40
G 4640 40
G 3120 20
G 4420 20
G 4415 15
G 3115 15