Olympia ECS 625.4 CCD, Руководство по эксплуатации

Страница: 20 / 100

20
5.2 ECS function (automatic EcoShred operation)
When the
ECS
2
function is activated, the shredding operation of the cutting mechanism
starts up automatically as soon as material is inserted in the respective infeed slot:
●
The device switches to forward drive and draws the material in.
●
5 seconds after shredding is finished, the device switches off automatically.
The
ECS
function is activated by pressing the
ECS
button. The
ECS
button then lights up
blue.
Note:
When the
ECS
function is activated, paper can be shredded via the paper
infeed and CDs, DVDs and credit cards shredded via the CD infeed. Only
one infeed may be used at a time. If you use more than one infeed, the
device stops. Pay attention to the permissible quantity of material which
can be shredded.
Note:
When the
ECS
function is activated, the device has a very low power con-
sumption.
5.3 Shredding paper
Note:
A maximum of 25 sheets of A4 paper with a weight of maximally 70 g/m
2
may be inserted in the paper infeed at a time.
Note:
Remove any other material from the paper, such as paper clips or labels.
7. The device is switched on and the
ECS
function is activated.
8. Insert paper in the paper infeed.
5.4 Shredding CDs, DVDs and credit cards
Note:
Only insert 1 CD, DVD or credit card at a time for the shredding process.
1. The device is switched on and the
ECS
function is activated.
2. Insert the CD, DVD or credit card in the CD infeed.
Note:
If, for security reasons, you want to shred credit cards using particle-cut
(cross-cut), you can also feed credit cards into the shredder's paper infeed.
This only applies for credit cards and not for CDs/DVDs!
5.5 Emergency stop
If the
ECS
function is activated or forward or reverse operation are on, you can stop the
device immediately in an emergency situation by pressing the
ECS
button.
5.6 Switching the device off
Set the On/Off switch to its
OFF
position.
2
Abbreviation for
Ec
o
S
hred