Olympia Carrera De Luxe MD, Руководство по обслуживанию

Страница: 39 / 76

4.4.7 Line Locator Adjustment
Check:
The front plate (1) must be mounted with no gaps.
The gap between the platen (2) and the line locator (3) must be
between 0.01 to 0.02 inches (0.3 to 0.6 mm).
Adjustment:
1) Loosen the left and right screws (3-A) for the line locator (3) and
adjust the gap between the platen (2) and the line locator (3) so
that it is 0.01 to 0.02 inches (0.3 to 0.6 mm). In addition, the
bottom lines of characters must be roughly parallel with the
dotted line on the line locator.
2) Tighten the left and right screws (3-A) and fix the line locator (3)
in place.
Possible symptoms:
Shifting of printed characters due to the paper being only loosely
held in place. Problems with movement due to the pressure of the
paper and the platen. (Carrier motor "step out" or problems with
the carrier home position.)
4-13