Page 4
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note:
Finger tighten hardware until
assembly is complete.
1.
Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cart.
2.
Attach two Swivel Casters (14) to one side of the
Bottom Shelf (12), using eight sets of Bolts (13),
W
ashers (3) and Nuts (4).
3. Attach two Locking Swivel Casters (
11) to the other
side, using eight sets of Bolts (13),
Washers (3) and
Nuts (4).
Swivel
Caster
Locking
Swivel Caster
Bottom
Shelf
Nut
Washer
Bolt
Figure A
4.
Attach a Cross Support (10) between two
Right Posts (1), using two sets of Bolts (2),
W
ashers (3) and Nuts (4).
5.
Repeat with remaining Cross Support
and two Left Posts (6).
Post
Bolt
Nut
Washer
Cross
Support
Figure B
6.
Bolt
Washer
Nut
Figure C
WARNING!
The Chest is heavy; do not attempt to
lift and lower onto Cross Supports
without assistance.
7. With assistance, lift up the Chest, then lower
it carefully between the Posts until its bottom
edges rest on the Cross Supports.
8.
Attach the Handle (7) to lower holes on same
side as Locking Swivel Casters, using two
sets of Handle Bolts (9) and Nuts (4).
9. Secure Posts to Chest using fourteen sets
of Bolts (2), W
ashers (3) and Nuts (4).
Chest
Handle
Bolt
Bolt
Figure D
10.
Tighten all hardware.
OLYMPIA TOOLS INTERNATIONAL, INC.
Tel. 626-336-4999 / Fax. 626-336-489 / Web. www.olympiatools.com
Attach Posts with Cross Supports to the outside
corners of the Bottom Shelf, using sixteen
sets of Bolts (2), W
ashers (3) and Nuts (4).
