Page
3
from
7
(*) Non Maintained operation: The luminaire lights its illumination source, only in power supply’s
failure.
Maintained operation: The luminaire lights its illumination source, when it is powered by the mains
power supply or not
.
The light source contained in this luminaire shall only be replaced by the manufacturer, or
his agent, or a similar qualified person.
NOTE! The light source is non-user replaceable.
LED MODULE CHARACTERISTICS
Olympia Electronics S.A
.
60 °C max. across the board
Cable connection between main pcb and led module
19-23V
4.9W
2002163
Manufacturer
Voltage Range
Connections
Nominal Power
Temperature (tc)
GRL-29/WP/ADR
X
0
1
0
8
A
B C F
INDICATION LED STATUS (with the mains power supply connected
)
POWER / CHARGE
LAMP FAULT / BATT. FAULT
Disconnected battery
/
not charging
Normal operation mode
Charged battery
Low emergency duration
(
replace battery
)
Battery under charge
Lamp fault (Check lamps and replace if needed)
Indicator ON
Indicator Blinking
Indicator OFF
NOTE:
LED= Light Emitting Diode
LABELING EXPLANATION:
X:
Self contained
0:
Non Maintained (*)
A:
Including test device
B:
Including remote test mode
C:
Including inhibiting mode
F:
Automatic test gear complying with IEC 61347-2-7 denoted EL-T
18
0:
3
hours duration
Model Number
923029012_09_0
01
