Page 2 from 4
mode.
Indication LED status
(with connected mains power supply).
Charge
On:
Good charge current.
Οff:
No battery (No charging current or
disconnected battery).
Lamp fault
Οn: F
aulty LED strip.
Off:
Good LED strip.
Fault
Οff:
Battery OK.
Blink
(With
Charge LED
ON): Autonomy or low
battery problem
(the battery must be replaced).
Blink
(With
Charge LED
Off):
No charging current or disconnected battery.
ΑΤΤΕΝΤΙΟΝ!!!
1. Operations for installation, maintainance or
testing must be done by authorized personnel
only.
2. The device must be connected to the mains
power supply through a fuse depended on the
total amount of the line’s power load.
In case of battery or lamp replacement, these
must be replaced by parts of the same type, by
the manufacturer or by a competent person.
t i
in battery recycling
points. Do not incinerate.
3.
4. In case of inactive use for a period greater
than 2 months, disconnect the battery by pulling
out the battery’s connector.
5.
I s not allowed to discard batteries in to
common trash bins, they must be
discarded only
923939008_09_01
7
(*)
Maintained operation: The luminaire lights its illumination source, when it is powered by
the mains power supply or not.
Non Maintained operation: The luminaire lights its illumination source, only in power
supply’s failure.
Note!! The installer should fill in, on the specification label,
the letter
G
if the luminaire is used as a safety sign.
X 1
9
*
0
A G
NOTE:
LED= Light Emitting Diode
LABELING EXPLANATION:
X:
Self contained
1:
Maintained
(*)
A:
Including test device
G:
Internally illuminated
*90:
1.5 hour duration
180:
3 hours duration