24/02/2020 10 / 24 923650001_09_008.doc
2.2.
Information menu
In the information menu the options are:
INFORMATION MENU
NETWORK
ZONES
PANEL
ZONES IN EMERGENCY
PANEL SOFT VERSION
TECHNICIAN INFO
LOOP
LOOP OUPUT
POINTS
ZONES IN FAULT
DISABLED ZONES
SHOW DISABLED
Figure 2-12
•
“PANEL” shows informat
ion about mains power supply, battery and the charger
•
“LOOP” shows information about loop points, voltage etc
•
“LOOP OUTPUT” displays the voltage of the four outputs of the loop
•
“ZONES” shows which zones are in emergency, disabled
or have faults
•
“POINT” sho
ws the configuration of each address. With UP/DOWN keys you can scroll
between addresses
•
“SHOW DISABLED” shows the points/luminaires that are disabled
•
“NETWORK” shows information about the Ethernet module (IP and MAC address)
•
“
PAN
EL SOFT VERSION” shows the
software version of the panel and the loop
•
“TECHNICIAN INFO” shows information concerning the technician
2.3.
Events menu
In this menu you can have access to the event log of the panel. The event log has capacity up to 250
events.