2
921100400_90_001_QG_EN
DESCRIPTION
The Addressable Fire Alarm systems BSR-100x of
1,2 and 4 loop outputs, all sharing the same
control interface, functionality and indications.
The provided software PC-1004 for Windows PC,
not only provides utilities and tools for
calculating installation parameters, but also is
able to set and configure the control panel as
well as keeping an event log record. All the
models include 4 outputs for conventional
sirens, three BMS relays and 24V outputs.
Each loop output connection can support
up to 150 addressable units and the “ Loop
Calculator ” tool shall be used for cable selection
according to your installation size. All features
and indications are in accordance with European
standards ΕΝ 54 - 2 and ΕΝ 54 - 4.
PRODUCTS
-
BSR-1001 – 1 LOOP
-
BSR-1002 – 2LOOP
-
BSR-1004 – 4LOOP
SPECIFICATIONS
Dimensions: 355 x 115 x 345mm
Weight : <4.33Kg (Without batteries)
Input Power: 230VAC, 50-60Hz, <130VA
Operating Temperature: -5° ~40°C (23°F – 104°F)
Degrees of cover protection : IP30
CAUTION
-
This product may only be installed or
maintained by a qualified Electrician.
-
The system must be installed in accordance
with national regulations and requirements.
-
All power must be disconnected before
installation or maintenance.
-
Only original spare parts must be used for this
product.
-
The panel is compatible only with the
corresponding Olympia Electronics addressable
luminaires.
NEEDED MATERIALS
-
Mounting Hardware.
-
Screwdrivers
-
Multi-meter
-
Pliers
-
Cutter
MAINTENANCE
The periodical checks must follow the EN54-14
or be verified according to local regulations.
WARRANTY
Olympia Electronics guarantees the quality,
condition and operation of the goods. The
period of warranty is specified in the official
catalogue of Olympia Electronics and also in the
technical leaflet, which accompanies each
product. This warranty ceases to exist if the
buyer does not follow the technical instructions
included in official documents given by Olympia
Electronics or if the buyer modifies the goods
provided or has any repairs or re-setting done by
a third party, unless Olympia Electronics has fully
agreed to them in writing. Products that have
been damaged can be returned to
the premises of our company for repair or
replacement, as long as the warranty period is
valid. Olympia Electronics reserves the right to
repair or to replace the returned goods and to or
not charge the buyer depending on the reason
of defection. Olympia Electronics reserves the
right to charge or not the buyer the
transportation cost.
CONTACT DETAILS
72nd km. O.N.R. Thessaloniki-Katerini
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.gr
Tel. +30 23530 51200
