Date 29/6/2021
Document number 921100409_09_002
Page 70 of 73
70 / 73
8.5.2
Panel network detection
In order to complete panel network setup, electrical connection to the mains network as well as connection
between the panels with the RS-485 network should be carried out. Then address 1 is set to master panel
from
“TECHNICIAN MENU”
on submenu
“SETUP”
by selecting
“PANEL NETWORK”
, then select
“NETWORK SETUP”
and
“ENABLE”
and finally select
“PANELS DETECTION”
. During panel detection
master panel will detect every active subpanel and repeater which is available on the network. Eventually,
the master panel will return to main screen. In order to view the detection results, select from the master
panel
“INFORMATION”
on the main menu and then select
“NETWORK PANELS”
and
“ACTIVE
ADDRESSES”.
