GENERAL
This device is a sounder for fire detection
panels that offer a strong sound that
covers many square metres.
It features
two inputs (N1, N2) for the production of
two different sounds.
This device can co-operate with any fire
detection panel (BSR-2104, BSR-2114,
BS-1632, BS-1634, BS-1636, BS-636).
Installation and Connection
1.
First, remove the retaining screw, place
a flat blade screwdriver in the holes of the
plastic hooks and remove the plastic cover
(Image 1 on page 2).
2.
Use the supplied mounting parts to install
the siren’s base on the wall. Place the
plastic plugs and fasten the screws to the
mounting holes
.
3.
Insert the
inclu
ded sealing rings around
the respective recesses
(image 2,3 page 2).
4.
Place the caps and make a hole in the
center using a small screwdriver.
Pass
through the caps the cables to connect the
device.
5.
The (
+N1
or the
+N2
)
terminal block
is
connected to the
(
+
)
output of
Alarm-1
or
Alarm-2
of the panel and the (
-
)
of the
terminal block is connected to the
(
-
)
out
put
of
Alarm-1
or
Alarm-2
of the panel.
Accordingly connect in parallel all the
sirens. (The maximum number of sirens
depends on the type of the panel).
6.
To select various
sound effects
use the
dipswitch 1,
2
and
3 and
choose the
diserable sound effect,
according to
tables 2
and 3 on page 3.
7
.
On the last siren of the line, we must
connect in parallel with its power cables,
the terminal resistor that was removed
from the alarm contacts of the panel.
8
.
Refit the plastic cover until the plastic
hooks are securely attached (step 1) and
fasten the retaining screw (torque
0.6Nm).
9.
Test the device after installation.
Β
S-530
/1
/WP
High Quality European based Manufacturers
WATERPROOF SOUNDER FOR FIRE DETECTION PANEL
921530005_09_0
04
Page 1 from 4
Thank you for your trust in our products.
Olympia Electronics - European manufacturer
.
TECHNICAL CHARACTERISTICS
21-28V DC
1.2W
IP 65
EN 54-3:2001 +A1:2002 +A2:2006
o
0 to 60 C
Up to 95%
230gr.
141 x 141 x 95 mm
OPERATION VOLTAGE
MAXIMUM CONSUMPTION
MAXIMUM SOUND OUTPUT in
1
m
Τ
YPE OF APPLICATION ENVIRONMENT
MOUNTING
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
EXTERNAL DIMENSIONS
TYPICAL WEIGHT
GUARANTEE
DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH
CONSTRUCTION MATERIAL
2 years
Bayblend FR3010
,
transparent
polycarbonate
Τ
ype
B
Wall
94dB (sound effect 1
)