OLYMP Engineering X Band Up/Downconverter, Паспорт изделия

Страница: 10 / 13

10
4 LED indicators
5 USER connector BNC Female
6 PRF connector BNC Female
7 RF In “Up Converter” connector SMA Female
8 RF In “Down Converter” connector SMA Female
9 RF Out “Up Converter” connector SMA Female
10 RF Out “Down Converter”
connector
SMA Female
11 VST LO connector SMA Female
12
~
220 V power in connector
13 PROG connector D-Sub-9, (Comport)
14 GND M6 screw
In the Table 4 are shown VST connector types.
Table 4
VST
RF IN SMA Female
RF OUT SMA Female
LO IN SMA Female
LO OUT SMA Female
LO IN SMA Female
DIGITAL I/O VHCDI
7.6 Operating procedure
The first step of the operation is to turn on the PXI System with VST, and then the VST transceiver and
the DUT. After that, pressing the "PWR" button, turn on the X Band Up/Downconverter.
8. Safety requirements
Turn on the X Band Up/Downconverter device to the network in accordance with required voltage,
according to the enclosed instructions to the device.