54.
Attach
4P -
Rear Middle Trims
where wall
panels come together at rear seam. Attach with
8 - 1 1/2” Finishing Nails
aligning tight
underneath soffit and center on seam.
Parts
4P - Rear Middle Trim
(1/2” x 2 1/2” x 88 3/4”)
x 2
Hardware
N1 - 1 1/2” Finishing Nails
x 16 total
55.
Locate one
4Q -
Side Facia
and one
4R -
Front Facia
and
align in front corner. Position facias underneath roof panel, doing
a dry run first before securing. Front Facia goes against rafter
ends and Side Facia goes against Facia Nailing Strip. Align so
the Front Facia caps the Side Facia. Attach Front Facia with
2 -
1 1/2” Finishing Nails
per rafter end. Attach Side Facia to
the Facia Nailing Strip with
5 - 1 1/2” Finishing Nails
.
Parts (Steps 56 - 59)
4Q - Side Facia
- Angle Cut Ends
(1/2” x 5 1/2” x 54 1/8”)
x 2
4R - Front & Rear Facia - L/R
(1/2” x 5 1/2” x 50 1/2”)
x 4
4S - Front & Rear Facia - Center
(1/2” x 5 1/2” x 45 1/2”)
x 2
Hardware (Steps 56 - 59)
N1 - 1 1/2” Finishing Nails
x 46 total
Facia Nailing Strip
Side Facia
- Angle Cut
Front
Facia
Front Facia
caps Side Facia
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 33
