29.
With Rafter Section correctly aligned, secure rafters to walls using
2 - 90° Metal Brackets
per side. Attach each brackets with
4 - 1 1/4” Screws
.
Screw into Wall Extender framing at the front and Wall Panel top framing at
the rear. Complete both sides.
Hardware
Y2
- 90° Metal Bracket
x 4 total
S2
- 1 1/4” Screws
x 16 total
90° Metal Brackets
30.
With outside rafters properly secured, attach remaining interior rafters using
1 - 2 1/2” Screw
per rafter end. Screw into rafters from inside of Wall Extender
framing at front of shed, and from inside of Rear Wall top framing at rear of shed,
behind Horizontal Wall Cleats.
Hardware
S1
- 2 1/2” Screws
x 14 total
31.
Locate all 4 different plywood
roof panel sizes required to com-
plete roof section. Begin with an
Outside Large Roof Panel
in
Step 32
.
Parts (Steps 31 - 35)
3F
- Outside Large Roof Panel
(5/8” x 48” x 50”)
x 2
3G - Center Large Roof Panel
(5/8” x 48” x 45 1/2”)
x 1
Parts (Steps 31 - 35)
3H - Outside Small Roof Panel
(5/8” x 50” x 5 3/4”)
x 2
3I - Center Small Roof Panel
(5/8” x 45 1/2” x 5 3/4”)
x 1
Hardware (Steps 31 - 35)
S2
- 1 1/4” Screws
x 45 total
Outside Panels
50” wide
Center Panels
45 1/2” wide
Outside Panels
50” wide
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 22
