background image

Congratulations on assembling
your 4x2 Garden Chalet!

Note;

Our Sheds are shipped as

an unfinished product.  If exposed

to the elements, the western red

cedar lumber will weather to a 

silvery-gray color. If you prefer to

keep the cedar lumber looking 

closer to the original color, we 

suggest that you treat the wood

with a good oil base wood st ain.

You may also wish to paint your

new shed rather than stain it.  In

both cases we recommend that

you consult with a paint and stain

dealer in your area for their 

recommendations.

We hope your experience constructing our 

4x2 Garden Chalet

has been both positive and 

rewarding. We value your feedback and would like to hear back from you on how well we are doing

in the following areas:

1. Customer Service
2. On Time Shipping
3. Motor Freight Delivery
4. Quality of Materials
5. Assembly Manual
6. Overall Satisfaction.

Please call, write or email us at: 

The materials contained in this Assembly

Manual may be downloaded or copied

provided that ALL copies retain the 

copyright and any other proprietary

notices contained on the materials. No

material may be modified, edited or

taken out of context such that it s use

creates a false or misleading statement

or impression as to the positions, 

statements or actions.

Canadian Address
9393 287th Street
Maple Ridge, British Columbia
Canada     V2W 1L1

United States Address
P.O. Box 96
Sumas, Washington
USA    98295

Toll Line: 1.888.658.1658         |      Fax: 1.604.462.5333      |      [email protected]

Page 18

Содержание Garden Chalet 4x2



















Отзывы: