background image

Outdoor Living Today                 www.outdoorlivingtoday.com            [email protected]

Page 1

Dog House

Assembly Manual

Revision #1.0

Oct 30, 2019

Thank you for purchasing
our Dog House. Please take
the time to identify all the
parts prior to assembly.

In the event of a missing or broken piece, call the Outdoor Living Today Customer Support Line @ 1-888-658-1658 with-
in 30 days of the delivery of your purchase. It is our commitment to you to courier replacement parts, free of charge,
within 10 business days of this notification. Replacement parts will not be provided free of charge after the 30 day
grace period. 

All structures purchased from Outdoor Living Today are covered for a period of one year for defects in manufacturing
and workmanship. Costs incurred for customer installations are not included.

Failure to use supplied parts included in this kit could result in poor product performance and may void your warranty.
Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from our written instructions.

- Have a regular maintenance plan to ensure screws, hinges, handles and other parts

are tightly affixed.

- To keep any liquids from soaking into the plywood floor, we recommend you paint 

the floor of your Dog House with a latex based paint before attaching the walls

- In areas with high or gusty wind conditions, it is advisable to install the structure

securely to the ground.

Customer agrees to hold Outdoor Living Today and any Authorized
Dealers free of any liability for improper installation, maintenance and
repair.

Cleaning your Dog House
couldn’t be simpler, just
open the hinged roof for
easy access and sweep it
out.

After closing the roof,
remember to reattach the
hook which is installed in
Step 25. 

Содержание Dog House

























Отзывы: