3.
Attach panels completely
together using
4
additional
2 1/2” Screws
evenly
spaced on panel framing.
Make sure panels are
aligned prior to
screwing. Pre-drill first to
prevent wood from splitting.
4.
Position and attach
2nd Rear Panel (Part A)
together making sure both rear frames are
aligned at top and sides. Use
2 - 2 1/2” Screws
in the upper screen frame area as illustrated to
the right. From the inside, angle screw
3 - 2 1/2”
Screws
into panel framing to secure completely.
Use
Wood Clamp
to hold panels tight together
while screwing and pre-drill first to prevent wood
from splitting.
Inside
A
- Rear
3 - 2 1/2”
screws
Be sure to level the
ground so panels sit
evenly.
Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 20
