Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 6
6.
Evenly position Leg Ends tight against Table
Top Boards and Table Top Cleat. When in
correct position, pilot hole 2 holes with 1/8” drill bit
and secure with 2 - 2 1/2 screws per Leg.
Complete both Bench Support / Leg Assembly’s.
2 1/2” Screws
H
E
Angle Bracket
Table Top Cleat
7.
Center Angle Bracket (H) on Table Top Cleat (E). Be sure to
align pieces as shown above. Attach with 2- 2 1/2” screws into
pre-drilled holes of Angle Bracket. Complete opposite side.
Hint:
Assemble on edge of work table makes this Step easier.
Longer Side
Angle Bracket
centered on Cleat.