Laying out your Footprint
To determine the proper placement of your
5 3/8” x 5 3/8” Posts, see the exploded view
on Page 2 to find the measurements and to
determine their correct positions. Outside
Post to Post measurements for the 12’x16’
Breeze are: 192” x 144”.
Take diagonal measurements to check your
layout for square.
We recommend that you fix Posts to ground
using Steel Post Bases or Saddle Brackets
fixed on cement footing. If attaching Posts to
pre-existing deck, we recommend that you
purchase Post / Deck Mounting Brackets. In
both cases, Post Mounting hardware can be
found at most Hardware Stores.
144”
192”
1.
On flat level ground, lag-screw
Girder (B)
to two
Posts (A)
approximately 8” from top of Post.
Girder (B) is square cut on one end. Complete 2 sets of Girder/Post Sections.
Note; Pilot hole Post first with 1/4” drill bit.
B
13.5”
8”
A
Deep Notch facing
down and inside
flush with post.
B
B
Girder (B) positioned 1/2
way on Post.
Completed Post/Girder (B) Section.
Use 2 Washers and
Lag Screws.
Use 2 Washers and
Lag Screws.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 4
