Olsberg MultiDrive 3, Руководство пользователя

Страница: 6 / 21

6
Getting started
Installing the battery
Install a fully-charged battery in the hand controller
as shown on the right. (1)
The battery must be installed correctly (2) or the
hand controller will not start.
A fully-charged 1700 mAh battery provides approxi-
mately 8 hours of operation.
Activating the system on the crane
To turn on the crane’s control unit press the on but-
ton on the Space X4 RC Box. The LED above the
button will then start to blink. (3)
Then press the remote control button on the Space
X4 RC Box. The LED above this button will first start
blinking and when the radio connection is estab-
lished it will light steadily. (4)
The decoder starts when remote control operation
is selected and the decoder’s yellow LED starts to
blinks.
The crane’s control and safety system is now ready
to be connected with the hand controller.
Activating the controller
To activate the hand controller pull the stop button
out by turning it clockwise (2) . The hand controller is
powered up and starts to establish a radio link with
the decoder on the crane. While radio contact is
being established a flashing hourglass and the text
“Wait” is shown on the centre display.
(6)
Remaining battery power is displayed and the signal
strength symbol flashes when radio communication
is established but the hand controller and decoder
are still exchanging connection data.
1
2
Technical description
Connection time for a cold-start can be up to 5
seconds. A cold-start occurs when the hand control-
ler or decoder on the crane have been off for the
last 10 minutes. When restarting within 10 minutes
of turning off the hand controller, the radio link is still
established and the hand controller is ready for use
immediately.
The factory setting for the period of time the hand
controller maintains contact with the decoder after
pressing the stop button is 10 minutes.
3
4