Olorin VC190D, Руководство пользователя

Страница: 20 / 35

20
How to Operate
Control Dial
The Control Dial is a multi-functional device located behind the LED Indicator on the right side of
the front bezel. It has three movements-rotate upward, rotate downward and press inward as a
button.
1. Power On/Off
Press the Control Dial to power the unit on from the off stage (the display is off). To turn the
power off, press the Control Dial and hold for at least 1 second until the display turns off.
2. OSD Control
While the monitor is on (image on the screen), pressing on the Control Dial activates the
OSD. While the OSD menu is active, use the three way movements of the Control Dial to
adjust the monitor.
Rotate Downward: Move Up/Right, Increase, Larger, More
Rotate Upward: Move Down/Left, Decrease, Smaller, Less
Button Press: Execute, Do, Save
3. Change of Brightness Setting
If you rotate the Control Dial without first having clicked to enter the OSD, then it will change
the brightness setting. On some models it will do so in a quick way by adjusting with larger
steps in the bright area and gradually lower values towards the dark area. This function is
disabled when the monitor is in Barten or Calibration mode.
LED Indicator
This LED indicator turns green when the power is switched ON and the power cord is properly
attached. It turns amber when the monitor goes into a power saving mode (Active Off). On some
models it will be switched off entirely after 10 minutes to avoid that the lamp will distract your
vision.