Olmo UWO-08AC115V, Руководство пользователя и инструкция по установке

Страница: 14 / 20

11
1. Without timer setting,the
operation mode is Cooling,Dry, Fan and Auto,and
the set temperature will be displayed.
Time will be displayed under timer setting.
Digital Display:
3. Turn the air conditioner on and
off.
Power Button:
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto.
4. Mode Button:
1
2
3
4 5 6 7 8 9
AUTO
SPEED
AUTO
MODE
You may hear a pinging noise caused by water
hitting the condenser on rainy days, or when the
humidity is high. The design features help remove
moisture and improve efficiency.
Cool Mode: The cooling function allows the air
conditioner to cool the room and at the same time
reduces humidity. Press the MODE button to
activate the cooling function. To optimize this
function, adjust the temperature by pressing the
up and down arrows and the speed by pressing
the Fan Speed button.
Dry Mode: This function reduces the humidity of
the air to make the room more comfortable. Press
MODE button to set the DRY mode.
Fan Mode: This mode will only circulate the air.
Press MODE button to select FAN MODE.
Pressing the FAN SPEED button allows you to
change the fan speed setting from HI, MED and
LO. If using the remote control, it will store the fan
speed setting from the most previous use.
Auto Mode: In AUTO mode the unit automatically
chooses the fan speed and the mode of operation
(COOL, DRY or FAN). In this mode the fan speed
and temperature are set automatically according
to the room temperature (Room temperature is
determined by the temperature sensor located in
the unit.)
and Button: Use these buttons on the
control panel and remote to increase or decrease
the Set Temperature or Timer. Temperature
range is between 61°F and 8°F
(16°C-31°C).
2.
^
^
5.
Timer Button: Use t hese buttons on the control
panel and remote to set the T imer.
Timer Off:
The timed stop is programmed by
pressing the TIMER button. Set the time by
pressing the button or
, set the temperature with pressing
Timer On:
button first
the button or
with pressing the
button or .
stop
until your
desired stop time is displayed, then press TIMER
button again.
When the unit is off, press TIMER
. Press TIMER button
a second time, set the stop time
Press TIMER button a
third time, confirm your settings and stop time.
The display will show the time your machine will
automatically turn on.
Note: It can be set to automatically turn off or on
in 0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below 10
hours and 1 hour increment for 10 hours or
above. The SET light will turn on while setting.
To cancel the set function, press the TIMER
button again.