background image

 Page 6 

Features

Indoor Unit 

Parts And Major 

Functions

Default Setting

When the air conditioner restarts after a power failure, it 
will default to the factory settings (AUTO mode, AUTO fan, 
24°C (76°F)). This may cause inconsistencies on the remote 
control and unit panel. Use your remote control to update 
the status.   

 

Auto-Restart (some models)

 

In case of power failure, the system will immediately stop. 
When power returns, the Operation light on the indoor 
unit will flash. To restart the unit, press the 

ON/OFF 

button 

on the remote control. If the system has an auto restart 
function, the unit will restart using the same settings.     

 

Energy Saving Tips

• 

DO NOT

 set the unit to excessive temperature levels.

• 

While cooling, close the curtains to avoid direct sunlight. 

• 

Doors and windows should be kept closed to keep cool or warm air in the room. 

• 

DO NOT

 place objects near the air inlet and outlet of the unit. This will reduce the efficiency of the unit.

• 

Set a timer and use the built-in SLEEP/ECONOMY mode if applicable.

• 

If you don’t plan to use the unit for a long time, remove the batteries from the remote control. 

• 

Clean the air filter every two weeks. A dirty filter can reduce cooling or heating efficiency. 

• 

Adjust louvers properly and avoid direct airflow.

Louver Angle Memory Function (Optional)

Some models are designed with a louver angle memory 
function. When the unit restarts after a power failure, the 
angle of the horizontal louvers will automatically return to 
the previous position. The angle of the horizontal louver 
should not be set too small as condensation may form and 
drip into the machine. To reset the louver, press the manual 
button, which will reset the horizontal louver settings.      

Refrigerant Leak Detection System (some models)

In the event of a refrigerant leak, the LCD screen will 
display “EC” and the LED indicator light will flash. 

Closing the curtains while heating also
              helps keep the heat in  

Doors and windows should be kept 
                        closed  

Содержание OSH-OU12HRK2















Отзывы: