Olmo OSH-07FRH2, Руководство пользователя

Страница: 5 / 44

OFF
OFF
Operation instructions
The operation modes change in sequence:
The fan speed is changed in sequence:
Selecting mode
FAN mode
Heating mode is not available for cooling only air conditioner.
At FAN ONLY mode, "Auto" is not available.
At DRY mode, Fan speed is set at "AUTO” automatically, "FAN SPEED" button
is ineffective in this case.
Setting temperature
Turning on
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2
－
5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
3
Operation modes
Press button once
Press button .
Result :
Result :
Press button once by once
Press button once by once
Auto 5
4
3 2
1
HEATING COOLING DRY FAN ONLY
Raise temperature setting by 1 ℃ or 1°F
Lower temperature setting by 1 ℃ or 1°F
Press button once
Result :
Result :
T he RUN indicator of the indoor unit lights up.
Result :
PRESS
PRESS
16 ℃ ~30 61 ℃ ( °F~86°F)
Range of available set temperature
*HEATING, COOLING
DRY -7 ~ 7
unable to set
FAN ONLY
* Note: Press and hold “ ” button and “ ” button together for about 2 seconds will alternate the temperature display between
the
℃ and °F scale.
* Note: Heating mode is NOT available for cooling only models.
* Note: At Dry mode, a decrease or rise of up to 7
℃ can be set with Remote controller if you still feel uncomfortable.
* Note: At FAN ONLY mode, setting temperature is not available.
When the remote controller turns on,
functions can be operated. T
except the CLEAN and the TIME ON function, all the other
he operation modes refer to below.