Olmo Alpic Series, Быстрый старт

Страница: 8 / 9

Used to restore the current settings or resume
previous settings.
he first time connecting to the power, if push
the SHORTCUT button, the unit will operate on
AUTO m
°F( )
, and fan speed is Auto.
ush this button when remote control is on,
the system will automatically revert back to the previous
ncluding operating mode, setting
temperature, fan speed and sleep feature
(if activated).
If push more than 2 seconds, the system will
automatically restore the current operation settings ,
including operating mode, setting temperature, fan
speed level , and sleep feature (if activated).
13
The FOLLOW ME function enables the
remote control to measure the temper-
ature at its current location. When using
AUTO, COOL, or HEAT functions,
measuring ambient temperature from
the remote control (instead of from the
indoor unit itself) will enable the air
conditioner to optimize the temperature
around you and ensure maximum comfort. 1.
Press FOLLOW ME button to activate
function. The remote control will sen
temperature signal to the indoor unit
every three minutes.
2. Press
FOLLOW ME
button again to
turn off this function.
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you press the TURBO button in
COOL mode, the unit will blow cool air
with strongest wind setting to jump-start
the cooling process.
When you press the TURBO button in
HEAT mode, for units with lectric heat
lements, the lectric eater will activate
and jump-start the heating process.
Airborne bacteria can grow in the
moisture that condenses around heat
exchangers in the unit. With regular use,
most of this moisture is evaporated from
the unit. By pressing the SELF CLEAN
button, your unit will clean itself automa-
tically. The cleaning cycle takes 30
minutes, after which the unit will turn off
automatically. Pressing the SELF CLEAN
button mid-cycle will cancel the operation
and turn off the unit.
You can use SELF CLEAN as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
FOLLOW ME function
SHORTCUT function
SWING function
SELF CLEAN function
TURBO function
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
Note: The SLEEP function is not available
in FAN or DRY mode.
,
Swing Button
Swing Button
Used to stop or start horizontal louver movement
or set the desired up/down air flow direction. The
louver changes 6 degree in angle for each press.
If push more than 2 seconds, the louver
will swing up and down automatically.
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
for each press. If push more than 2 seconds,
the vertical louver auto swing feature is activated.
o to Use t he Advanced Functions o to Use t he Advanced Functions
ON/OFF
ON/OFF
TEMP
TEMP
SHORT
CUT
SHORT
CUT
TIMER
ON
TIMER
ON
TIMER
OFF
TIMER
OFF
MODE
MODE
FAN
FAN
SLEEP
SLEEP
TRUBO
TRUBO
CLEAN
CLEAN
LED
LED
FOLLOW
FOLLOW
FRESH
FRESH
1 4