3. Other
Field Service Ver. 2.0 Jan. 2008
14
SD-505
Maintenance
Precaution for clincher reinstallation
• When the clincher is installed, the position of the stapler and the clincher will be
misaligned. Be sure to perform the following adjustment.
1.
Use three screws [1] to temporary fix
the clincher [2].
2.
Loosen the screw [1] of the stopper.
3.
Loosen three screws [2] of the
clincher.
4.
Aligning the protrusions of the jig [2]
with the recesses in the stapler [1], fit
the jig to the stapler.
NOTE
• Make sure that the protrusions of
the jig properly rest in the recesses.
5.
Turn the gear [1] of the clincher and
then slide the clincher assy so that
the protrusion of the clincher [3] fits
into the recess in the jig [2].
4511F2C550DA
[2]
[1]
4511F2C551DA
[1]
[2]
4511F2C552DA
[2]
[1]
4511F2C553DA
[1]
[3]
[2]
Service Manual Y108482-2
