manualshive.com logo in svg

Olivetti PG L2555, Руководство по обслуживанию

Поделиться
Скачать
Olivetti PG L2555 Скачать руководство пользователя страница 263

1-2-6

1. Mount the bulk paper feeder onto the rail in

the lower deck of the base. The rail is mov-
able and must be pulled out before installing
the bulk paper feeder. Pull the rail fully out
until it stops.

2. Grasp the bulk paper feeder by the two han-

dles in the side covers. Facing the paper
output slot of the bulk paper feeder toward
the printer, align the (four) positioning tabs
on the rail of the base with the holes in the
base of the bulk paper feeder. Then slowly
and carefully lower the bulk paper feeder
onto the printer base.

3. Slide the rail with the bulk paper feeder

mounted back toward the printer until the
connector on the front side of the bulk paper
feeder is fully connected to the connector on
the base, holding the bulk paper feeder by
the both hands.

Caution 
Ensure that the arrow marks on the rail are cor-
rectly aligned with the arrow marks on the front 
side of the bulk paper feeder before proceeding.

Figure 1-2-7

Installing the bulk paper feeder

Rear view

Arrow mark

Rail

Arrow mark

Rail

Printer base

Rail

Positioning tabs

(four)

Printer

Bulk paper feeder

Содержание PG L2555






































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды