3
ENGLISH
31.
- Subtracts or adds an amount from/to an item or
sales total.
32.
- Opens the cash drawer without registering any
amount or when changing cash for a non-sales
transaction. With the cash register in the programming
mode, used to select the different captions that can be
programmed.
33.
- Press at the end of a sales transaction to apply
the alternative VAT rate programmed. As the FC key,
automatically calculates and displays the value in foreign
currency of the subtotal of a sale or of a particular amount
registered.
Text Programming Keypad Functions
With the text programming keypad sheet installed to define
the different programmable captions, and with reference to
figure 5:
1.
- Advances the receipt or journal paper one line
feed; advances the paper continuously when held down.
2.
- Toggles between upper case and lower case
letters.
3.
- When pressed before a character, sets the
character as double width.
4.
- Provides the typical backspace function for
cancelling the last character entered.
5.
- Confirms a newly defined caption.
6.
- Confirm the entry of the selected character when
the same key is repeated to enter the same character
again.
7.
-
- When the related key is pressed, enters
the alphanumeic character wanted.
8.
- Press to skip from one caption definition line to
another.
9.
-
- Press to enter caption definition numbers
when skipping from one caption definition line to another.
10.
- Press to cancel all character inputs.
11.
- Press to exit the caption programming mode.
12.
- Press the select the different captions that can be
programmed.
NOTE:
In addition to being used for programming the cash
register’s captions, the text programming keypad sheet can
also be used to program all of the cash register’s operational
features.
The Control Lock
Insert the PRG, REG or Z key into the Control Lock to use the
cash register accordingly. With reference to figure 3, turn the
control key to one of the following positions:
OFF
The cash register is turned off and cannot be used.
PRG Used to program the cash register according to
your specific needs.
REG The cash register is set for standard sales transac-
tions. A customer receipt is printed for each transac-
tion.
MGR Overrides clerk status programming thus allowing
the clerk to perform unauthorized operations (for
example, Voids, Refunds, Negative percent, Paying
money out, etc.).
X1/X2 Prints the X management (mid-day) report.
Z1/Z2 Prints the Z management (end-of-day) report and
resets totals (except the grand total) to zero.
The Control Keys
REG The REGISTER key can be used in the OFF, REG,
MGR and X modes, granting both Clerk and Super-
visor access to cash register functions.
PRG The PROGRAM key works in all modes (PRG, OFF,
REG, MGR, X and Z). It is usually used by the
Supervisor to program the cash register and print X
and Z management reports.
Z
The Z key can be used in the OFF, REG, MGR, X
and Z modes granting a higher-level access with
respect to the REG key.
Operator and Customer Displays
Your cash register is equipped with a single-line customer
display and a dual-line operator display. With reference to
figure 6, the display is read from left to right as follows:
Department
(1) - A set of digits indicating the
department key pressed for each entry.
At the end of a sales transaction,
indicates the means of payment
registered.
Repeat/Multiply
(2) - A number displayed when repeat-
ing or multiplying items to indicate the
number of items entered at one price.
Amount
(3) - Indicates entry amounts and sales
totals.
1...15
(4) - With the Clerk System active,
indicates the clerk number entered
before working in the REG mode, or
whenever
is pressed.
Op. messages
(5) - Upper line of the operator display
showing programming and transaction
messages, and clerk identifiers.
Содержание ECR 5920 F
Страница 1: ...ECR 5920 F ECR 5920 F ECR 5920 F ECR 5920 F ECR 5920 F Cash Register USER S GUIDE ...
Страница 57: ......
Страница 59: ......
Страница 62: ...Code 520814 Code 520814 Code 520814 Code 520814 Code 520814 ...