The Cash Register has Department buttons through which to enter your sales.
The operation of all Department buttons is the same, the purpose of these are to assist
you in analysing your business. For example Department Button 1 could be used for
Food sales and Department Button 2 for Non Food. By entering the price of the goods
and pressing the appropriate Department button you will begin to analyse your sales
ready for the end of the day report.
• Insert the
OP
key and turn to the
R
position.
• Enter the price of the item eg. Enter
1 5 3
for £1.53
• Press one of the Department buttons eg. Press the
+DEPT 1
• To enter another sale repeat as above by entering a price then a Department.
• Press the SUBTOTAL button to show the value due.
• If you would like to calculate change, enter the value of money given to you by the customer.
eg.
1 0 0 0
for £10.00. It is optional to enter the money given, if no change calculation go to
next step.
• Press either the
CASH
CHEQ
or
CARD
buttons to open the drawer. The change due will
be displayed if the value of money given has been entered.
The Cash Register has the ability to act as a normal calculator. Unlike making a sale,
during this operation no information is added to the reporting totalisers.
• Insert the
OP
key and turn to the
R
position.
• Press the
RA
button to start the calculator operation.
An arrow is shown on the bottom left of the display to indicate calculator operation.
• Use the cash register as you would a calculator
• Enter the value eg. Enter
1 5 3
for £1.53
• Press one of the calculator buttons
+-/X
eg. Press the
+DEPT 1
• Repeat the entries press the =
CASH
button for the total
• Press the
RA
button to end the calculator operation.
Entering A Sale
5
L
•R
•X
•Z
•P
•T
•
Mode Lock
Calculator Operation
6
L
•R
•X
•Z
•P
•T
•
Mode Lock
The Cash Register has two reporting modes one for printing out the information
without clearing any figures. This is referred to as the
X
mode. The second is for
printing and clearing the figures back to zero ready for the next day, this is referred to
as the
Z
mode.
FULL FINANCIAL REPORT
• Insert the
OW
key and turn to either the:
X
position to print without clearing or
Z
position to print & clear sales.
• Press the
CASH
button. The end of day report is printed.
• Return the mode key to the
R
position
SHORT CASHING UP REPORT READ
• Insert the
OW
key and turn to the
X
position.
• Press the
X/TIME
button.
A short cashing up report is printed.
• Return the mode key to the
R
position.
Reporting
7
L
•R
•X
•Z
•P
•T
•
Mode Lock
