38
DVLink Synchronization Instructions
On the PC
1.
Verify that the cradle is connected to the serial port.
2.
Turn on the PC.
3.
If running DVLink for the first time, you need to make sure that the
data file is open. To verify that the data file is open, DV Link -
MYFILE should be visible at DVLink program title bar located the
top of the DVLink screen on the PC. If the file is not open, go to
DVLink file menu and select Open or select New from the DVLink
file menu and create a new data file.
4.
If you have set the DVSync program to automatically start when
you log in to your computer, DVSync should be running. To verify
the DVSync program is running on your PC, look at the bottom
right hand corner of your PC screen. You should see a DVSync
icon located near the area of the PC screen that shows the time of
day. This area is referred to as the system tray.
5. If you do not see the DVSync icon in the system tray, select
DVLink Synchronize by clicking Programs and then DVLink on
the PC Start menu. This will load the DVSync program and you
will see the icon in the system tray.
On the daVinci
6.
Make sure that the unit is well placed into the cradle.
7. Select
PC Sync on the daVinci Main Menu.
